Main Components:
High-quality acrylic emulsion
Titanium dioxide
Eco-friendly additives
Pigments and fillers
Deionized water
Features of Ultra-Elastic Textured Paint (Medium Elasticity)
1.High Elasticity:
- Elongation at break: ≥350% under standard conditions, ≥35% at -10°C.
- Tensile strength: ≥2.0 MPa (standard conditions).
- Stain resistance (white/light colors): ＜25%.
2.Weather Resistance: Durable, anti-aging with no bubbling, peeling, or cracking (≥400 hours aging resistance).
3.Stain Resistance: Resists mold and algae.
4.High Coverage: Effectively covers minor cracks.
5.Easy Application: Suitable for curved and vertical surfaces.
6.Eco-Friendly: Free from formaldehyde, benzene compounds, and heavy metals.
7.Top-Grade Standard: Complies with exterior wall coating standards.
Technical Parameters
- Theoretical Coverage: 0.5-0.7 kg/m² per coat (actual consumption depends on the method and substrate).
- Dilution Ratio: Add no more than 5% clean water if necessary.
- Drying Time:
Surface dry: ~2 hours.
Recoating: Minimum 24 hours (at 25°C, 50% humidity).
Extend drying time in low temperatures. - Curing Time: 7 days at 25°C. Extend for temperatures below 5°C to achieve optimal results.
- Standards: GB18582-2020 ("Limits of harmful substances in architectural coatings") and JG/T172-2014 ("Elastic exterior wall coatings").
- Product Specifications: 20 kg per bucket.
- Shelf Life: Refer to the product label.
- Storage Conditions: Store in a sealed container in a cool, dry place at 5°C–35°C. Avoid frost and direct sunlight.
Application System
|
System |
Product |
Application Method |
Coats |
Theoretical Consumption |
|
Base Layer |
Anti-Crack Exterior Putty |
Troweling |
1-2 coats |
1.2–1.5 kg/m²/mm |
|
Primer Layer |
Exterior Wall Anti-Alkali Primer |
Rolling/Spraying |
1 coat |
0.1–0.15 kg/m² |
|
Topcoat |
Ultra-Elastic Textured Paint (Medium Elasticity) |
Rolling/Spraying |
2 coats |
0.15–0.2 kg/m² per coat |
Application Instructions
Ideal for high-end residential buildings, villas, hotels, apartments, schools, and factories.
- Base Layer Leveling:
o Use high-quality exterior putty with fine particle size, high hardness, and waterproof/alkali-resistant properties.
o Strictly follow water-to-putty ratios, ensuring no clumps or lumps during mixing. Apply 1-2 coats. - Primer Application:
o Stir the primer thoroughly before use. Follow the specified dilution ratio, avoiding excessive dilution.
o Apply 1 coat evenly using a roller or sprayer. Use a brush for corners and gaps to ensure full coverage. - Topcoat Application:
o Stir the paint thoroughly before use. Follow dilution guidelines if required.
o Use a roller or spray gun to apply 2 coats evenly. Maintain a drying interval of 4 hours between coats.
Precautions
1. Surface Inspection:
o Before application, strictly inspect and accept the base surface in accordance with national standards.
o Ensure the surface is flat, clean, solid, and free of oil, mold, algae, dust, or other contaminants.
o The pH value must be <10, and moisture content must be <10%.
o Do not proceed with application when the wall temperature is below 5°C, relative humidity exceeds 80%, or during strong winds, rain, snow, or thunderstorms.
2. Worker Safety:
o Workers must adhere to local safety regulations and wear appropriate protective gear, including safety goggles, gloves, and professional work attire.
o Ensure suspended platforms, scaffolding, or other construction tools are sturdy and reliable.
3. Construction Planning:
o Plan the work area and workforce to ensure each working surface is completed in one go.
o Position seams at logical points, such as floor divisions or at internal/external corners, to avoid visible joints.
o Use materials of the same batch and color code on the same project to avoid color inconsistencies.
4. Separation Joint Setup:
o Set up joints scientifically to prevent cracking and ensure decorative effects.
o Tape Joint Method: After the primer dries, mark the joints, divide sections, and apply masking tape. Remove the tape before the topcoat dries.
o For small sections (<0.5 m²), applying black primer is recommended to improve work efficiency.
5. Material and Application Techniques:
o Follow specified water dilution ratios and construction techniques.
o Operate in strict accordance with guidelines.
6. Tool Cleaning and Waste Disposal:
o During work interruptions or upon completion, promptly clean tools with clean water.
o Do not discard leftover paint or waste into drains or water sources.
o Handle waste materials, including containers and unused paint, in accordance with local environmental regulations.
7. Eye Contact:
o If the product comes into contact with the eyes, rinse immediately with clean water and seek medical attention if discomfort persists.
8. Authenticity Assurance:
o Avoid purchasing products with incomplete labeling to protect user rights. Be cautious of counterfeit products.
9. Further Information:
o For additional information, consult your local distributor or request the product manual.
Get in Touch With Matex YG
Matex YG News & Insights
The Complete Guide to Diatomaceous Earth Pool Filters: Enhance Your Pool’s Efficiency
Carbon vs Activated Carbon: Understanding the Difference and the Role of Matex YG in the Industry
