Main Components:
High-quality polymer emulsion
Natural sand
Eco-friendly additives
Deionized water
Features of Multi-Color Water-Based Sand
1. Natural Stone Finish: Realistic granite and marble effect with a rich, elegant look.
2. Impact Resistance: Strong impact protection, water resistance, and algae prevention.
3. Natural Texture: Rich patterns and textures, with a tactile finish resembling natural stone.
4. Weather Resistance: Superior durability in all climates with excellent aging resistance.
5. Ease of Application: Suitable for curved and complex surfaces.
6. Self-Cleaning Properties: Excellent stain resistance keeps walls looking new.
7. Crack Coverage: Flexible to cover fine wall cracks. Eco-Friendly: Free from formaldehyde, benzene compounds, and harmful heavy metals.
Technical Parameters
1. Theoretical Coverage: Approximately 1.2-1.8 kg/m² for two coats. Actual consumption depends on application thickness and surface condition.
2. Dilution Ratio:
Do not dilute with water; apply directly.
3. Drying Time:
o Surface dry: ~2 hours
o Recoating: Minimum 24 hours (at 25°C, 50% relative humidity). Extend drying time in colder conditions.
4. Curing Time: 7 days at 25°C. For temperatures below 5°C, extend curing time for optimal results.
5. Standards:
o GB18582-2020 ("Limits of harmful substances in architectural wall coatings")
o HG/T4343-2012 ("Water-based multi-color building coatings")
6. Product Specifications: 50 kg per bucket.
7. Shelf Life: Refer to the product label.
8. Storage Conditions: Store in a sealed container in a cool, dry place between 5°C–35°C. Protect from frost and avoid direct sunlight.
Application System
|
System |
Product |
Application Method |
Coats |
Theoretical Consumption |
|
Base Layer |
Anti-Crack Exterior Putty |
Full Trowel Application |
2 coats |
- |
|
Primer Layer |
Transparent Penetrating Primer |
Rolling/Spraying |
1 coat |
- |
|
Intermediate Layer |
Exterior Wall Middle Coating |
Rolling/Spraying |
1 coat |
- |
|
Topcoat |
Multi-Color Water-Based Sand |
Spraying |
1-2 coats |
1.2-1.8 kg/m² |
|
Protective Coat |
Self-Cleaning Topcoat |
Rolling/Spraying |
1 coat |
- |
Application Instructions
1. Base Layer Preparation:
o Use high-quality waterproof and alkali-resistant exterior putty.
o Mix the putty as per product instructions to ensure proper consistency.
o Apply 1-2 coats evenly and allow each layer to dry completely.
2.Primer Application:
o Stir the transparent primer thoroughly before use.
o Apply 1 coat using a roller or sprayer, ensuring uniform coverage without missing any areas.
3.Intermediate Coating:
o Stir the intermediate coating evenly. Apply 1 coat using a roller or sprayer.
o Ensure an even thickness without exposing the base surface.
4.Topcoat Application:
o Stir the main coating gently with a wooden stick (do not use a mechanical mixer).
o Use a dedicated spray gun to spray 1-2 coats evenly with consistent speed and motion. oEnsure a uniform texture without drips or accumulation.
5.Protective Topcoat:
o Stir the topcoat thoroughly before use. oApply 1 coat with a roller or sprayer for added durability and self-cleaning properties.
Precautions
1. Base Surface Inspection:
o Strictly inspect the base surface according to national standards before application.
o Ensure the surface is flat, clean, solid, and free of grease, mold, algae, dust, and other contaminants.
o The pH value must be <10 and the moisture content <10% to meet application conditions.
o Avoid application when the wall temperature is below 5°C, relative humidity exceeds 80%, or during strong winds, rain, snow, or thunderstorms.
2. Worker Safety:
o Workers must wear protective equipment such as safety goggles, gloves, and professional work attire according to local work standards.
o Ensure that suspended platforms, scaffolding, or other tools are sturdy and reliable.
3. Construction Planning:
o Plan work areas and team size carefully to ensure each working surface is completed in one go.
o Position handover points at floor separations, internal and external corners to avoid visible seams.
o Use the same batch and color of materials for the same project or working surface to prevent color variation.
4. Control of Expansion Joints:
o Plan expansion joints scientifically to prevent cracking and ensure the decorative finish.
o Separation Joint Technique: After the primer dries, mark lines, divide sections, and tape off with masking tape according to design requirements. Remove the tape before the main coat dries.
o For areas smaller than 0.5 m², black primer is recommended to improve work efficiency. 5. Material Handling and Operation:
o Follow the recommended water dilution ratio and construction techniques. Operate according to specified guidelines.
6. Tool Cleaning and Waste Disposal:
o If work is interrupted or completed, clean tools immediately with clean water.
o Do not dispose of leftover paint or waste materials in drains or water sources.
o Waste materials, including containers and unused paint, must be handled according to local environmental regulations.
7. Eye Contact:
o If the product comes into contact with the eyes, rinse thoroughly with clean water. Seek medical attention if discomfort persists.
8. Authenticity Assurance:
o To protect user rights, avoid purchasing products with incomplete labeling. Be cautious of counterfeit goods.
9. Further Information:
o Contact your local distributor for additional product details or manuals.
Get in Touch With Matex YG
Matex YG News & Insights
Is Food Quality Diatomaceous Earth Safe For Pets?
How to Use Diatomaceous Earth for Skin Care
